| Price | $10,000-25,000 | $1,099 | $599 | $199 |
| Grade | Genuine Rolex | AAAAA Clone | AAA Replica | A Replica |
| Movement | Rolex Calibre 3230 | Genuine Swiss Clone 3230 movement | Swiss 2836 Movement | Asian 2813 Movement |
| Time Accuracy | -3/+5 sec per day COSC certified | -5/+6 sec per day COSC certified | -10/+10 sec per day COSC certified | -1/+2 min per day COSC certified |
| Stainless Steel Type | 904L Stainless Steel | 904L Stainless Steel | 316L Stainless Steel | 316L Stainless Steel |
| Bezels | Fixed | Fixed | Fixed | Fixed |
| Crystal | Sapphire crystal | Sapphire crystal correct date magnification | Sapphire crystal | Mineral Glass |
| Case Size | 39mm | 39mm | 41mm | 41mm |
| Logo & Markings | laser etchings | Exact on entire watch | 90% Exact on entire watch | 70% Exact on entire watch |
| Dial | Genuine Rolex | Exact detail and font | 90% exact detail and font | 70% Exact detail and font |
| Luminous Markers | Rolex Lumen | SuperLuminova Swiss Lumen | Swiss Lumen | Normal Lumen |
| Waterproof | 100m on standard models | Tested up to 300m | Tested up to 30m | Life waterproof |
| Life expectancy | Lifetime | Lifetime | 3-5 years | 1-2 years |
| Warranty | 2 Years | Up to 5 Years | Up to 3 Years | Up to 1 Years |
| Gender | Unisex |
| Case Size | 41mm |
| Brand | Rolex |
| Series | Oyster Perpetual |
| Model | m124300-0005 |
| Band Length | 18cm |
| Case Thickness | Around 15mm |
Band Material: 316L. The raw material for this band is 316L steel, which is a very strong and corrosion-resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.
Watch Case: 316L. A good case can better protect your watch. 316L will never fade, deform, wear, and is environmentally friendly.
Case Back: Solid. We are using a solid bottom cover, which is more waterproof than transparent. A waterproof sealing ring is added to the through-bottom watch, which makes it difficult to seal.
Crystal: Sapphire Crystal. The watch uses a sapphire crystal glass table mirror, the vision is clear and bright when looking at the time. Tips: The A Replica is applied with mineral glass instead of sapphire.
Hand: Silver-tone. The hands of the replica watch is silver-tone. It blends perfectly with the dial.
Second Markers: Minute Markers around the outer rim. The minute mark around the outer edge of the glass is a design element representing time, also known as a clock hand, which has been used in many well-known designs.
Dial Markers: Luminous Index. Many people can’t tell the time in the dark. This watch has a luminous stick, which will be highlighted when you are about to look at the watch, and then gradually dim when you look at the watch.
Luminiscence: Hands and Markers. The luminosity of the watch is hands and markers. It makes your watch look more high-end.
Bezel Material: Stainless Steel. A stainless steel bezel is more simple and endurable. It makes you improve your taste from the inside out.
Clasp: Fold Over Clasp. A fold over clasp are used here to make it easier and faster for the user to open and fold the watch case to keep it secure.
Water Resistance: 30 meters. Want a watch waterproof? Don’t hesitate to choose us, the depth of the watch is 30 meters. But please make sure you close the crown properly. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
| Movement | 1:1 Clone, A Replica, AAA Replica, AAAAA Clone, Top 1:1 Clone |
|---|
Reviews
There are no reviews yet.